Twitter
ClickBank1
cancer marine phytoplankton

How You Can Decide On a Very Low or No maintenance decking Product.

We’re going to look at exactly how todecide upon a decking material that is appropriatefor ones own application. I will work through the particularlevels of composite decking and then provide you various thoughts of where to proceed after that.

Let us start by having anclarification of what we mean by a ‘no maintenance deck’.Washing is not thought to be maintenance if we look at brick pavers, as an example. This is actually the same regarding decks if you would like it thoroughly clean you get out there with the brush and sweep leaves ordirt away - only when you want to. A zero upkeep deck is one in which staining or evensealing or perhaps stripping the actual sealer or even sanding back or reapplying thesealer on a frequent timetable is not needed.  Almost all normal timbers require this procedure to obtain the most life out of them. Quite a few natural timbers demand it more regularly compared to others. Even as much as every 90 days in some cases andcircumstances.

If many of us aren’t interested or dedicated to carrying this out then we can move to the new products called composite decking, plastic decking, C (wood plastic decking) or simply PVC decking. 

We classify the new composite decking in three levels. Level 1 budget friendly to Level 3 top of the range. Let’s go through the levels:

Level 1 - normally a mix of polyethylene plastic, just like the sort we use for plastic milkcontainers, as well as soft wooden fibres or rice husks, depending on the producer. These are generally decent products in the manner theyattain the ‘no maintenance’ level in decking. They generally feature a 10 year manufacturer’s warrantywhich warranties the product do not warp,twist or rot, pest resistant, zero painting, sealing or sanding.

Level 2 - normally a mixture of polypropylene plastic material, similar to your computer cases, and reclaimed or recycledhard wood fibers. They’rebetter composite decking materials with up to 25 yearguarantees. More fade and scatch resistantcompared to level 1. Bear in mind mostdecking materials scuff and care needs to be taken. As an example putting soft pads under your outdoor furnishings and lifting rather than dragging. 

Level 2.5 – capped composites. The core of these contain the lower level materials to save cash and then wrap them in a high levelmaterial for durability and performance. This is a great level to find ideal materials.

Level 3 – 100% Pvc material decking. Despite the fact that we all stilllabel these items composite they include zero timber.Wood is the weak point and these decking products which do not contain any are the most effective of the best, prime quality. Highly scratch and fade resistant. And onesolution by TimberTech: XLM has passed the bushfire examination in Australia. With thisrange, the Desert Bronze color in my opinion is the most authentic composite decking on the market.

Therefore since you can see there is no maintenance decking products available which are good, better, excellent and thebest. I think you’ll find that specific one whichyou prefer the very best.

Need to find out more about Decking?  Take a look at the Decking Perth website.  The author has alsowritten a freshly released articleregarding business caoches

Poisons in Our Food?

 

Society has a love-hate relationship with plastic. We sure use a lot of it, but even before an actor whispered “Plastics…” as a word of advice in the movie The Graduate, plastic often meant shoddy, imitation, and uncool.

 

Ardent environmentalists tend to hate plastic. You know the issues there.

 

Now there are other concerns about plastics — namely, that they are poisoning our food supply. These concerns stem from the fact that unsavory chemicals in some plastics can leach into food. Canada highlighted the issue by proposing a ban of plastics containing bisphenol-A, a compound with significant toxicity.

 

Recently, a study published in the Journal of the American Medical Association revealed even more startling findings about bisphenol-A.1 In a large population study of individuals between the ages of 18 and 74, it was found that people with higher levels of bisphenol-A in their urine also had higher rates of cardiovascular disease and diabetes.

 

This is especially worrisome because bisphenol-A is found in a plastic called polycarbonate used to make baby bottles. While the study authors were clear that this does not necessarily show a cause and effect relationship, it is well worth noting the risk.

 

The question of safety regarding polycarbonates raises a larger question — just how safe are all the plastics that we come into regular contact with? Or phrased differently, what are the risks of packaging and serving food and beverages in plastic?

 

First, we have to realize that not all plastics are the same. Their chemical composition varies, so naturally their risks vary.

 

Fortunately, a number stamped on the bottom of most plastic containers tells us which plastic the container is made of. That code is your key to evaluating the risk.

 

Here’s a quick run-down.

 

Number 1: Polyethylene Terephthalate (PET or PETE).

 

This is the lightweight, clear plastic commonly used in soda and water bottles. Many consider it a safe choice because it is not prone to leaching chemicals. However, an Italian study has shown some leaching into water that was stored in a PET bottle for over nine months.2

 

Another problem with PET is that it doesn’t clean well. For this reason, never reuse PET bottles.

 

Number 2: High-Density Polyethylene (HDPE).

 

Milk jugs are usually HDPE. This translucent plastic is also used for shopping bags and the bottles that contain many household products such as cleaning supplies and shampoos. It has a low risk of leaching.

 

Number 3: Polyvinyl Chloride (PVC).

 

PVC is used to make packaging materials, including some food containers. It is also used for plastic wraps. Softeners added to PVC tend to migrate into food and raise safety concerns.

 

Number 4: Low-Density Polyethylene (LDPE).

 

This plastic is found in bread bags and squeezable bottles. Fortunately, studies to date have not shown any chemicals leaching from LDPE into food.

 

Number 5: Polypropylene (PP).

 

This is the stuff of fishing lines and surgical sutures, as well as syrup bottles and yogurt tubs. It appears to be toxin-free.

 

Number 6: Polystyrene (PS).

 

You’ll recognize this as Styrofoam, so widely used in coffee cups and fast food containers. Unfortunately, it can leach styrene compounds into foods. Please don’t reheat your coffee in a microwave if it’s in Styrofoam. Better yet, find an alternative to the Styrofoam cup.

 

Number 7: Polycarbonate.

 

This is the clear, rigid, shatterproof plastic used for safety glasses (good) as well as backpacking water bottles and baby bottles (not so good). It contains bisphenol-A, a compound that can interfere with normal hormones and may be related to heart disease and diabetes

 

So that’s the summary.

 

Once again, we have a situation where health advocates raise reasonable sounding concerns while the manufacturers claim their products are safe. Canada bans plastics with bisphenol-A while the FDA assures us the available evidence doesn’t support a ban.

 

What’s a reasonable person to do?

 

First, let’s acknowledge that plastics are extremely useful compounds. We wouldn’t want to be without them. However, their overuse raises concern for both environmental and health reasons.

 

While the FDA reports that some chemicals do leach into food from plastics under some conditions, they claim the levels are very low and that current research shows no adverse effects at these levels.

 

I’m not particularly interested in ingesting these chemicals even if no adverse effect has yet been proven.

 

I think a reasonable approach is to use plastic selectively. For example, I’m not about to go back to glass shampoo bottles. The combination of a glass bottle, wet, soapy hands, a tile floor, and bare feet just isn’t good. But I do prefer my tomato juice bottled in glass.

 

Reduce plastic usage overall. Be especially selective about using plastic to hold food or drinks. The chemical levels may be low, but why would you want any if you had a choice?

 

Evaluate the situations where you use plastic and see if another material might be a better choice.

 

References

  1. http://pubs.ama-assn.org/media/2008jer/0916.dtl#1.
  2. http://www.thegreenguide.com/doc/98/bottle.

[Ed. Note: Joseph F. McCaffrey, MD, FACS is a board-certified surgeon with extensive experience in alternative medicine, including certification as a HeartMath Trainer. His areas of expertise include mind-body interaction and cognitive restructuring. Dr. McCaffrey strives to help people attain their optimum level of vitality through attention to all aspects of wellness. For more information, click here.]

This article appears courtesy of Early to Rise’s Total Health Breakthroughs which offers alternative health solutions for mind, body and soul.


Rss Feed Tweeter button Facebook button Reddit button Delicious button Digg button Flickr button Stumbleupon button Newsvine button Youtube button